INTL: (253) 473.5000
RECOMMENDED CONTENT

[Case Application] Company Compresses its R&D Cycles with High-Temp Tooling Boards

[White Paper] Fast, Economical Tooling Options for Prototyping and Custom Builds

[Case Application] Hexcel Uses PU Tooling Board for Fast and Low-Cost Tooling Alternative

[Product Data Sheet] LAST-A-FOAM® FR-4800 High-Temperature, Low CTE Tooling Board

[Blog] Which Tooling Option is Best for Rapid Prototyping?

[On-Demand Webinar] High-Temp Epoxy Urethane Foam: Economical Alternative for Soft Tools and Molds

[Blog] Satisfying the Large and Small of Customer Tooling Needs

[Video] Large Tool Demo Using HEXTool® M61

[User Guide] Bonding, Machining, Finishing and Curig Guide for LAST-A-FOAM® Tooling Boards

[White Paper] Reduce Costs and Develop More Accurate Tooling

[Blog] Transforming PU Foam into Production Tooling
WEBINAR: HIGH-TEMPERATURE EPOXY URETHANE FOAM: AN ECONOMICAL ALTERNATIVE FOR SOFT TOOLS AND MOLDS
High-Temperature, high-density epoxy urethane foam is an economical and time-saving solution for small soft monolithic or large-mass tools, as well as low-rate or rapid prototyping. It can be more rapidly machined, it is easily bonded and it is more economical than wood, allow or epoxy-based alternatives. Common applications include prototype machining, prepreg composite layup tooling, vacuum form tooling, tool proofing, pattern making, and master model making.
In this webinar, viewers will learn:
- Soft tool properties
- Density selection
- Tool preparation
- Curing the tool